Features:
This is a horizontal gasoline engine model, using an ancient structure with water cooling and a fly ball speed limiter to adjust the speed. Carefully made of brass, aluminum alloy and stainless steel, it has a unique and exquisite shape, stable and reliable structural design, and a wooden base for easy placement and operation. You'll love this retro and sophisticated gasoline model.
Engine starting steps:
(1) Check the engine wiring from the wooden base, connect the fuel tank pipe, and install 3 AA batteries (4.5V).
(2) Add water to the engine water tank. Fill the fuel tank with 95# gasoline. Once filling is complete, turn the flywheel on the right side of the engine clockwise two turns. Its function allows the fuel mixture to enter the cylinder completely. Make sure there is no air trapped in the fuel line.
(3) Turn on the power switch and quickly rotate the flywheel on the right side of the engine clockwise to start the engine.
Notes:
(1) If the ignition device is normal and the cylinder compression is normal, but the machine cannot start normally, it is likely that the carburetor oil needle needs to be adjusted.
(2) After tightening the main oil needle on the carburetor, loosen 1/4 turn and start the flywheel so that the mixing ratio of gasoline and air reaches the normal working mixing ratio.
(3) When the machine stops running, the power switch should be turned off. cool down.
Material: brass/aluminum alloy/stainless steel/wood;
Color: as shown in the picture;
Overall size: 180*125*125mm;
Engine size: 180*125*75mm;
Wood base size: 180*66*50mm;
Weight: 1620g;
Displacement: 6CC;
Cylinder diameter: 22mm;
Stroke: 20mm;
Flywheel diameter: 88mm;
Ignition device power supply voltage: 4.5V (uses 3 AA batteries, batteries not included);
Starting method: external force (electric drill) or hand start;
Fuel used: gasoline.
Packing list:
engine*1, hand puller*1, instruction manual*1
